Game Boy Color Q5 IPS LCD Backlight Kit with Laminated Lens and OSD – Hispeedido

• Built-in OSD Menu.
• 20 Brightness Levels.
• Desaturation Function in Normal Color Mode. This function can make the color of IPS LCD images closer to the original color of GBC games.
• 31 Logo Color Options.
• 5 Pixel Effects.
• 8 Adjustable Color Modes. (Color adjusting not available in normal color mode.)
• 16 to 1 Pixel Integer Scaling.
• 25% Larger Display Area.
• Frame Blending.
• LCD is pre-laminated to glass lens.
• Display area is larger than the original. Only recommended when using a custom laminated shell from Funnyplaying or Hispeedido. Shell modification required for all other shells. No refunds are given if a non-recommended shell is used.

INCLUDED:

• 1x IPS LCD with laminated lens.
• 1x PCB with touch sensors
• 1x Ribbon
• 3x Pieces of Kapton Tape
• 1x Insulation Film
• 5x Wires.

PAIRS WELL WITH:

• Game Boy Color Retro Pixel Laminated Q5 IPS Shell

DOCUMENTATION:

• Install Guide
• Non-recommended shell trim guide – *Please read warning at the top of product page before proceeding with purchase/install. We only recommend pairing this IPS kit with the laminated shells by FunnyPlaying or Hispeedido. All other shells will require modifications, install at your own risk.
• How to test your LCD kit.

NOTES:

• OSD can be operated with touch sensors (no soldering required) or button presses (requires soldering).
• See product photos for OSD menu instructions.
• We only recommend installing this kit in laminated shells. All other shells will require trimming, install at your own risk.

WARNINGS:

• You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.
• Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
• Damage to console or LCD may occur if you do not trim the cartridge port pins. Exercise caution when trimming pins, wear eye protection to protect from pin debris when cutting the metal. Damage caused by these pins are not covered under our return or exchange policy. Trim the pins of your Gameboy’s cartridge slot flat so that they don’t interfere with any parts of the kit. We also recommend placing some Kapton tape over the trimmed pins to prevent any shorts.