Game Boy Advance SP V2 IPS LCD Backlight Kit with Laminated Lens and TV Out – Hispeedido

Play your modded Game Boy Advance SP on your TV! This kit includes an exclusive cable to output your game to a modern TV. RCA input is required.

FEATURES:

• Connect to the original motherboard with a 9′ composite RCA AV cable
• Compatible with all SP models
• Press and hold the brightness button for 5 seconds to activate TV mode
• Complete with the same features as the V2 model
• Soldering is required
• 10 levels of brightness and 8 levels of color palates
• Pair with HDMI converter for upscaled resolution
• You will need a GBA SP Headphone/Audio adapter in order to get sound from the TV. Sold separately.

INCLUDED:

• 1x IPS LCD with adhered lens (See Warnings)
• 1x PCB (V2) with two pre-soldered touch sensor wires
• 1x Insulation film
• 1x PCB adhesive strip
  
• 1x Ribbon
• 3x Wires
• 1x RCA AV cable

DOCUMENTATION:

• Install Guide
• How to test your LCD kit

NOTES:

• Brightness touch adjustment includes pre-soldered wires.
• Optional: Button control brightness adjustment includes wires that will need to be soldered
• Shell trimming required with OEM, non-IPS ready, and IPS ready shells. Please see install guide for further information.
• Logo text on glass lens is silver.
• After installation, if it is noted that your touch sensor is overly sensitive or is cycling, please see this article for assistance.

WARNINGS:

• You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.
• Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.